synthetic turf venue before use to spread the load should be prohibited fireworks, timely and clean

Game preparation
synthetic turf venue before use to spread the load should be prohibited fireworks, timely and clean.
1) painting
No one will reach a "lasting", the appropriate use of these coatings can endure a quarter. Paint latex paint should belong to a super soft and strong adsorption
Painted steps
a) paint dry venue
b) recommend the best lawn temperature at 18 ℃ to 30 ℃
c) to be as clean as possible venues
d) on the lawn of the thickness of the coating is very important to try to avoid paint paint too thick. The proportion of paint diluted to appropriate.
e) coatings to be dry is very important, the best finished paint drying time of 48 hours, before the site into use
Note: Do not use a brush or roller to the venue lacquered
2) watering
On many occasions, the coaches, the players, as well as training staff in the use of synthetic turf during often the lawn wet in order to make the temperature drop. This measure is very useful, because the weather is very hot, wet sports venues will soon evaporate water, to achieve the purpose of reducing lawn temperature. In the same region, the temperature of the wet synthetic turf and natural grass is the same. Evaporation of fast, pay attention to the prolonged use of the venue should be extra sprinkle some water.
Note: pouring wet grounds wet surface can be, do not soak the lawn or saturated Do not use contaminated water.
2) Other special patch
A) cigarette burns
Usually cigarettes will melt fiber top and hard spots. Use a metal brush (scraping paint) scrub the spots, if you can not brush brush with a knife and then cut off the spots
B) empty point
These parts of the lawn filler compared to the entire site to be sparse, usually after every fill some time before being found. These areas can not see, but similar to the depressions, like the feeling when walking on the lawn there will be patches of empty point region should do
- Continue to brush the entire site again, this step is very important
- A rubber filling in a specific null point is very thin, and some local and be swept into the fiber, again finishing lawn particles
- Cleaning the entire site again